1.Charging pile type:Outdoor new energy vehicle charging generally uses two main types of charging piles, namely AC (AC) charging pile and DC (DC) charging pile.

2.AC charging stations:AC charging stations are the most common charging devices that provide electrical energy through a home outlet or a specific charging facility. Due to the low efficiency of AC conversion, the charging speed is relatively slow, which is suitable for long-term parking scenes, such as homes, offices and shopping malls.

3.Direct current (DC) charging stations:DC charging stations can charge electric vehicles faster because they transfer power directly to the battery in the form of DC. This makes DC charging piles ideal for long journeys and rapid charging. Dc charging piles are generally located in high-speed service areas, gas stations, large commercial buildings and other places.

4.Charging time:The charging time depends on the battery capacity of the electric vehicle, the charging power, and the charging stage of the electric vehicle. Typically, it takes a relatively short time to charge a vehicle to around 80%, while a full charge can take much longer. Fast charging piles can charge electric vehicles to more than 80% in a short time.

5.Charging station network:For the convenience of users, a network of charging stations has been established everywhere, providing a wide range of charging points. You can find a nearby charging station through the app or navigation system and see its charging pile type, power and idle status.
Electricity calculation: Charging service providers usually charge based on the length of the charging pile or the amount of charge. Charging costs can also vary depending on the charging station used and the charging service provider. Some charging stations offer membership programs or packages for more economical charging prices.

6.Safety precautions:During outdoor charging, ensure that the charging cable and charging port are properly connected to avoid accidents. Follow the instructions of the charging pile and vehicle manufacturer and do not use damaged or mismatched charging devices. In addition, try to choose a reputable, reliable and standardized charging pile supplier.
These are the basic knowledge of outdoor new energy vehicle charging, I hope to help you! Remember to keep an eye on safety at all times during charging and keep in touch with the manufacturer of the charging device and vehicle.
Outdoor new energy vehicle charging knowledge:

7.Charging pile type:Outdoor new energy vehicle charging generally uses two main types of charging piles, namely AC (AC) charging pile and DC (DC) charging pile.AC charging stations: AC charging stations are the most common charging devices that provide electrical energy through a home outlet or a specific charging facility. Due to the low efficiency of AC conversion, the charging speed is relatively slow, which is suitable for long-term parking scenes, such as homes, offices and shopping malls.

8.Direct current (DC) charging stations:DC charging stations can charge electric vehicles faster because they transfer power directly to the battery in the form of DC. This makes DC charging piles ideal for long journeys and rapid charging. Dc charging piles are generally located in high-speed service areas, gas stations, large commercial buildings and other places.

9.Charging time:The charging time depends on the battery capacity of the electric vehicle, the charging power, and the charging stage of the electric vehicle. Typically, it takes a relatively short time to charge a vehicle to around 80%, while a full charge can take much longer. Fast charging piles can charge electric vehicles to more than 80% in a short time.

10.Charging station network:For the convenience of users, a network of charging stations has been established everywhere, providing a wide range of charging points. You can find a nearby charging station through the app or navigation system and see its charging pile type, power and idle status.
Electricity calculation: Charging service providers usually charge based on the length of the charging pile or the amount of charge. Charging costs can also vary depending on the charging station used and the charging service provider. Some charging stations offer membership programs or packages for more economical charging prices.

11.Safety precautions:During outdoor charging, ensure that the charging cable and charging port are properly connected to avoid accidents. Follow the instructions of the charging pile and vehicle manufacturer and do not use damaged or mismatched charging devices. In addition, try to choose a reputable, reliable and standardized charging pile supplier.

12. These are the basic knowledge of outdoor new energy vehicle charging, I hope to help you! Remember to keep an eye on safety at all times during charging and keep in touch with the manufacturer of the charging device and vehicle.

Portability Is a big trend of electronic product development. It adopts the unique folding car charge design, condenses the product volume, and is extremely convenient to carry.

Safety        

    This product has passed various international safety performance tests such as CCC, UL, FCC, CE, etc., and is guaranteed by insurance companies, which strongly protects the safety of use performance and consumer rights.

Fashionability                                                                                                              

    Targeting the high-end consumer group of car owners, the fashionability of car chargers is also valued by manufacturers.Generally made of ABS material and piano paint process, it is not only fashionable and exquisite, but also feels very good.                                                                             

As the world shifts towards electric vehicles (EVs), the demand for efficient and convenient charging solutions is on the rise. One such solution that has gained popularity is the wall-mounted EV charger.

Wall-mounted EV chargers offer several advantages over traditional charging methods:
Convenience: These chargers allow EV owners to charge their vehicles at home or at work, eliminating the need to find a public charging station.
Efficiency: Wall-mounted chargers can provide faster charging speeds compared to standard outlets.
Cost Savings: Charging at home can be cheaper than using public charging stations.

The Installation Process
The installation process for wall-mounted EV chargers is relatively straightforward. Assuming you have wiring available, wall-mounted chargers are quicker to install; simply bolt them to the wall. Of course, it’s recommended to have a professional electrician perform the installation to ensure safety and compliance with local electrical codes.

As the concept of environmental protection is deeply rooted in the hearts of the people, more and more people choose new energy vehicles instead of travel. The growth of this product has also promoted the development of the new energy vehicle charging gun industry. Because the charging problem of new energy vehicles has always been the most concerned about by car owners. So how can we ensure the safety and efficiency of electric vehicle charging? What are the characteristics of the new energy vehicle charging gun?

Feature 1. The overall protection level of the charging gun is up to the standard, and the protection of its core contacts also needs to meet the standard. Only in this way can it ensure that there is no leakage during use and it can be used for a long time;

Feature 2. The size of the head of the charging gun should be appropriately enlarged on the premise of meeting the size requirements. There should be no screws or metal parts exposed on the outside, because metal is a conductor, and once it is touched, it will endanger life. The charging gun should be protected as much as possible. User's personal safety;

Feature three, the interface size of the charging gun and the performance of the product need to fully meet the requirements of national standards.

[Knowledge] What should be paid attention to during the charging process of new energy charging piles?
New energy trams or cars have been popularized in our lives, and many consumers are more inclined to choose to buy new energy trams or cars as a means of transportation. After we buy a new energy car, we will inevitably have to deal with charging piles, so what should we pay attention to during the charging process?

1. Before charging, check that the charging pile equipment is intact, and the cables and connectors are intact. If there is no canopy on rainy days, do not use the charging pile in the open air to prevent the danger of leakage.

2. If the charging pile connector or charging cable is defective, cracked, worn, broken, or the charging cable is exposed, it is strictly forbidden to use the charging pile. If you find this situation, you should contact the staff in time to repair it.

3. Do not put flammable, explosive or combustible materials, chemicals, flammable vapors and other dangerous items close to the charging pile.

4. Keep the charging head clean and dry. If it is dirty, please wipe it with a clean dry cloth. It is strictly forbidden to touch the charging core with your hands when it is charged.

5. During charging, do not cut off the power directly, or do not pull out the charging head and leave after stopping charging.

6. During the charging process, the vehicle is prohibited from driving. It can only be charged when it is stationary. Before charging, ensure that the vehicle has been turned off before charging.

7. If there is any abnormal situation during use, you can immediately press the emergency stop button to cut off all input and output power.

8. At the end of charging, it is recommended to wait for the charging interface to jump completely before plugging in the charging head.

[Knowledge] National standard DC car charging gun | What are the advantages of DC charging gun?

With the popularity of electric vehicles, many car owners are becoming more and more concerned about the charging piles of their cars. At present, there are two kinds of DC charging guns and AC charging guns that are more common on the market. Both of these can charge new energy vehicles in a timely manner. Let's talk about the advantages of DC charging guns.

1. The power is very large
The main advantage of the DC charging gun is that the power is very high, and the high power means that the charging speed will be greatly improved. Its power is generally around 380v or even higher. Most of this DC charging gun will appear in some urban streets, gas stations, car service stations and service areas of expressways.
2. Fast charging speed
The charging speed of the DC charging gun can be faster than that of the AC charging gun. Basically, it can be fully charged in about an hour, which greatly improves the charging efficiency.

Therefore, if you want to achieve the purpose of fast charging, the DC charging gun is the best choice. It can be completed from 30% to 80% in just 30 to 50 minutes.

[Dry goods] What is the difference between the national standard charging gun and other charging guns?

When using new energy vehicles, the choice of charging gun is inseparable. When charging new energy vehicles, everyone must have different options such as European standard charging guns, national standard charging guns, and American standard charging guns. So what is the difference between them? Many people still don't know the difference. Let me briefly introduce them to you.

The European standard and the American standard are currently the unified charging standards for Europe and the United States, while the national standard charging gun is mainly for the charging of domestic new energy vehicles. This is the same as the mobile phone charging head we usually use. . In fact, these three charging guns are all for charging, but the plugs used are different. The number of holes in the plug is also different. There are many charging holes in the charging gun, and each charging hole has its own function.

Therefore, when you buy a charging gun, you must choose according to the charging port of your car to see whether it is suitable for the national standard charging gun or other charging guns. Now there are converters on the market to facilitate the adjustment of various charging ports. Conversion use.