The charging pile is a universal indoor and outdoor charging pile,
which meets the IP55 protection level and can be installed in open places.
Ensure that the ambient temperature ranges from -30 ° C to +50 ° C.
The installation site must not be higher than 2000 meters above sea level.
There should be no violent vibration and inflammable and explosive materials near the installation site.
The installation site should not be in low-lying areas or areas prone to water accumulation.
Pile driving installation must have a wall support, if there is no wall support,
it is recommended to use a dedicated floor support for installation and fixing.
When installing the pile, ensure that the pile is vertical,
and the installation height ranges from the center point of the gun base to the horizontal ground: 1200~1300mm.
